Magnavox CT202MW8 Bedienungsanleitung PDF herunterladen

Thank you for subscribing to

Frontier TV Service. This User

Manual will show you how to

program and operate your

new Frontier TV Remote Control

(Model P265v3).

Quick Setup Guide Frontier

remote

The following steps will guide

you to quickly set-up your

Frontier TV remote for your TV.

1. Turn on your TV and the

Frontier STB. Make sure

you can see live television.

2. Locate the 3-digit code for

your TV brand in the list to

the right and circle the

correct code.

If your TV brand is not listed,

codes for additional TV brands

are listed at the back of this

manual.

3. Once you locate the brand

code, press and hold the

<OK> and keys

together. The RED LED on

the remote control will blink

twice and then stay on.

4. Enter the 3-digit TV code

for your TV brand using the

number pad. The RED LED

will blink twice and then stay

on.

5. Press and release the

<CH +> button repeatedly

until the TV turns off. You

can also “back up” by

pressing the <CH -> button.

*Please note – some TVs may

respond slower than others.

Please allow 1 second

between button presses.

6. Test that remote control is

programmed for your TV

a. Turn the TV on using the

key.

b. Press <VOL +> and

<VOL -> to make sure that

the volume keys work.

c. Press and keys.

d. If any of these keys do not

work as expected, press

and hold that key. Release

it as soon as it works.

7. If all these keys work, press

<OK> to save this TV brand

code programming. The

RED LED will blink 3 times

and then turn off

Your Remote Control is now

programmed for your TV!

Acronyms

1. RC = Remote Control

2. STB = Frontier TV Set Top

Box

3. VOL = Volume

4. CH+ = Channel Up

5. CH- = Channel Down

Frontier TV Remote Control

Codes for Major TV Brands

TV Brand Code

8) Troubleshooting

a. If the button does not

work correctly, make sure

the TV is on and go back to

Step 1 of the Quick Start

Guide. You can also try the

Code Search Method

below.

b. If the <VOL>, <Mute>, or

<A/V> buttons do not work

correctly, please refer to the

Key Fix Feature.

c. If you think you made a

mistake with programming

your remote, you can always

press the <Exit> button and

start over. The RED LED

will turn off if the RC is not

in programming mode.

d. If you don’t press any

buttons for 60 seconds, the

remote control will

automatically exit

programming mode.

e. Note, if you press the <CH>

button many times and the

lights on the remote control

all flash rapidly, the

programming attempt was

not successful.

f. If the Brand Search method

does not work, please try the

Code Search Method below,

which scans the complete

database for all TV codes.

g. If you are still having

problems programming the

remote, please call

877-462-0488

Code Search Method to

Program the RC

(This method could take up to

12 minutes)

1. Turn on your TV and the

Frontier STB.

2. Make sure you can see live

television.

3. Press and hold the <OK>

and buttons together,

then release both.

• The RED LED will blink

twice and then stay on.

4. Press and hold down the

button.

5. The Remote Control will try

a new TV code every

second, and the RED LED

026

035

070

114

128

146

164

180

193

210

222

243

279

285

290

294

302

321

331

332

333

335

342

352

371

397

418

424

433

440

AOC

Audiovox

Coby

Envision

Funai

Haier

Hitachi

Insignia

JVC

Magnavox

Mitsubishi

Panasonic

Philips

Pioneer

Polaroid

Proscan

RCA

Samsung

Sansui

Sanyo

Sceptre

Sharp

Sony

Sylvania

Toshiba

Viewsonic

Vizio

Westinghouse

Zenith

e. Once you have tried all the

TV codes in the remote

control, the RED LED and

the backlit buttons will flash

4 times rapidly, the RED

LED will turn off and the

remote will exit the

programming mode.

f. If you are still having

problems programming the

remote, please call

877-462-0488

OPTIONAL FEATURES

<STB Power> Button Turns

on TV and STB

Your remote has separate

power buttons for the TV and

STB. You can program the

key to turn on/off both

your TV and STB at the same

time.

1. Turn both your TV and STB

on.

2. Press and hold the <OK>

and buttons together,

then release both.

• The RED LED will blink

twice and then stay on.

3. Press 9 – 7 – 7.

• The RED LED will blink

twice and remain on.

4. Press .

• The RED LED will blink 3

times and then turn off.

5. Test that the key

now turns on the TV and

STB at the same time.

6. If you want to reset the

remote so that the key

controls Only the STB,

follow the same steps as

above but press <OK> in

Step 4.

Control TV Volume

Through STB

If the volume control keys

don’t work with your TV, you

can program the remote so

that the STB will control the

volume.

1. Press and hold the <OK>

and buttons together,

then release both.

2. The RED LED will blink

twice and then stay on.

3. Press 9 - 5 – 5.

will blink each time a new

code is sent.

6. When the TV turns off, stop

pressing the play button

right away.

• Please note – some TVs

may respond slower than

others.

7. You can press the <CH +>

or <CH -> buttons to go

forward or back one TV

code at a time.

8. Test that the remote control

is programmed for your TV.

a. Turn the TV on using the

key.

b. Press <VOL +> and

<VOL -> to make sure that

the volume keys work.

c. Press and .

d. If any of these keys do not

work as expected, press and

hold that key. Release it as

soon as it works.

9. If these keys all work, press

<OK> to save this TV brand

code programming. The

RED LED will blink 3 times

and then turn off.

Your Remote Control is now

programmed for your TV!

10. Troubleshooting

a. If the button does not

work correctly, make sure

the TV is on and go back

to Step 1 of the Code

Search Method.

b. If the <VOL>, <Mute>, or

<A/V> buttons do not work

correctly, please refer to the

Key Fix Feature.

c. If you think you made a

mistake with programming

your remote, you can

always press the <Exit>

button and start over. The

RED LED will turn off if the

RC is not in programming

mode.

d. Please Note, the Code

Search Method could take

up to 8 minutes, as it must

go through over 500 codes.

The most common codes

are tried first, but you may

need to press and

hold for a while to

locate the correct code.

4. The RED LED light will blink

twice, and remain on.

5. Press .

6. The RED LED will blink 3

times and then turn off.

7. If you want to change it back

again so that volume buttons

control the TV follow the

same steps as above but

press in Step 5.

Key Fix

If your remote control is

programmed for your TV, but

the <VOL>, <Mute>, or the

<A/V> keys do not work

correctly, then you can try

using the Key Fix feature to fix

the buttons.

1. Press and hold the <OK>

and buttons

simultaneously.

• The RED LED will blink twice

and then stay on.

2. Press and hold the key that

does not work correctly. The

remote control will try a new

code every second.

3. Once the TV responds

correctly, release the button.

4. Press <OK> to save the

current settings and finish

programming your remote

control.

Reset the Remote Control

Original Settings

1. Press and hold the <OK>

and buttons together,

and release.

2. The RED LED will blink

twice and then stay on.

3. Press 9 - 0 – 0.

4. The RED LED will blink 3

times and then turn off to

indicate original settings are

restored.

5. CAUTION, all previous

programming in the remote

control will be lost if you

follow this procedure.

General Instructions

1. Make sure the remote

control has a clear,

unobstructed view of the

STB and TV.

2. Your Frontier TV remote

control will only operate your

Frontier TV STB and your TV.

3. The remote will not operate

other devices like DVD

Player or Audio Receiver.

4. The <TV Power>,<VOL +>,

<VOL ->, <Mute> and

<A/V> buttons will always

control your TV.

5. All other keys on the remote

control will always control

your Frontier TV STB.

Getting Started

1. Turn on your TV and the

STB using the and

buttons.

2. If you have just watched a

DVD, make sure your TV is

set to the correct A/V Input

for your STB.

3. Press the <CH +>,or <CH ->

buttons to see the next

higher or lower channel.

4. You can go directly to any

channel by entering the

channel number on the

number pad and pressing

<OK>.

5. Press to see a list of

TV programs.

6. Press to return to TV

watching.

7. Press the button to

launch the Frontier TV Main

Menu. From the Main Menu

you can access all the

features of your Frontier TV

service.

8. Press <▲> <▼> <►> <◄>

keys to navigate through the

FrontierCC TV Menus and Guides.

To select any item, press

<OK>.

9. Press to return to the

last channel.

10. Press <Info> to see

information about the

current program.

11. Press <Exit> to return to

the previous menu option

or to watch TV.

New and Special Buttons

1. “On Demand” displays

a list of movies and other

programs you can watch at

any time.

2. “Widgets” displays local

weather, traffic, and other

information.

3. displays your list of

recorded programs if you

have DVR service.

4. “Favorites” displays your

list of favorite channels.

5. is a rocker button.

Press lower half of

the button to

pause the program. Press

upper half of the button

<►> to continue to play

from where you left off.

6. jumps back 30

seconds in the program you

are watching.

7. jumps forward 30

seconds in the program you

are watching.

8. records the current

program.

9. Buttons , , and

will only operate

during normal TV watching

if you have DVR service.

10. “If the RED LED starts

blinking 5 times rapidly

when you press the

<CH +/->, <VOL +/->, and

<OK>, or if the buttons

stop lighting up, you should

replace the remote control

batteries”

Frontier TV

P265v3 Remote

Control Manual

For video instructions, press

the <Menu> key on your

remote then select Help on

the Main Menu

AOC

Magnavox

Mitsubishi

Panasonic

Philips

Pion

026

035

070

114

128

146

164

180

193

210

222

243

Shortlist of brands

Brands Code

5-sec.

For additional information

about your Frontier

TV service and

your remote, call

877-462-0488

LIVE

1 2

Inhaltsverzeichnis

Seite 1 - Control Manual

Thank you for subscribing to Frontier TV Service. This Use

Seite 2 - BRAND CODES

COMPLETE LIST OF TV BRAND CODESTV Brand Code 3MA.R. SystemsAbexABSAccurianAcerActionAdmiralAdventAdventuraAftronAikoAimAiwaAkaiA

Kommentare zu diesen Handbüchern

Keine Kommentare

Magnavox CT202MW8 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Fernseher & Monitore Magnavox CT202MW8 herunter. Frontier TV P265v3 Remote Control Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher & Monitore Magnavox CT202MW8